Shaviv Hand Deburring Tool Sets
Three sets of Shaviv’s most popular, high quality ergonomic tools for precision deburring.
Mango II B+4 with Multi-Purpose “B” Blades
A popular set for deburring holes, slots and edges. Contains the Mango IIB extra-close-reach handle with a variety of blades for deburring materials with spiral or powdery chips. Included are 1 each of blades: B10, B11, B20 and B25. Blades are 2.6mm thick. All are suitable for deburring steel, aluminum, copper, brass, cast iron, and plastics. Storage area inside handle holds spare blades.
Mango II E+5 with Multi-Purpose “E” Blades
Rugged deburring set for heavy-duty deburring of holes, slots and edges. Contains the Mango IIE extra-close-reach handle for heavy-duty use in applications similar to above kit but this kit includes (3.2mm thick) stronger blades: E100, E111, E120, E200 and E300. Storage area inside handle holds spare blades.
Mango II B+E — “Two in One”
For both light and heavy deburring jobs. Contains the Mango IIM telescopic long-reach handle for variable extended reach up to 4″. Accommodates both B and E style blades. Includes are one each of blades: B10, B20, B30 and E200. Storage area inside handle holds spare blades.
Blade Details
Please refer to “Applications” tab above for specific materials applications for each blade shown below. Optional blades that are sold separately can be seen on this page.
| Shaviv# | Included in Kit(s) |
Description |
|---|---|---|
 |
B+4, B+E |
HSS. Deburrs materials with spiral chips. |
 |
Sold Separately |
PVD TiN coated for high resistance to wear. B10 geometry. |
 |
Sold Separately |
Long-lasting, cobalt-enriched. B10 geometry. |
 |
B+4 | Extra thin, HSS. Deburrs holes with minimum diameter 0.08″ (2mm). |
 |
Sold Separately |
PVD TiN coated for high resistance to wear. B11 geometry. |
 |
B+4, B+E |
HSS. Rotates clockwise & counterclockwise. |
 |
Sold Separately |
PVD TiN coated for high resistance to wear. Rotates clockwise & counterclockwise. B20 geometry. |
 |
B+4 | HSS. Thin-nosed. Specially designed for plastics. |
 |
B+E | HSS. Simultaneously deburrs the inside and outside of holes up to 0.16″ (4mm) thick. |
 |
E+5 | Heavy-duty HSS. Deburrs materials with spiral chips. |
 |
Sold Separately |
Long-lasting, cobalt-enriched. E100 geometry. |
 |
E+5 | Thin-nosed, HSS. Deburrs holes with minimum diameter 0.06″ (1.5mm). |
 |
Sold Separately |
PVD TiN coated for high resistance to wear. E111 geometry. |
 |
E+5 | HSS. E shaft with B20 cutting edge for materials with powdery chips. Rotates clockwise & counter- clockwise. |
 |
E+5, B+E |
HSS for materials with powdery chips. Rotates clockwise & counterclockwise. |
 |
Sold Separately |
PVD TiN coated for high resistance to wear. E200 geometry. |
 |
E+5 | HSS for materials with spiral chips. Simultaneously deburrs the inside and outside of holes up to 0.24″ (6mm) thick. |
