The envisionTEC Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.


Inner Chamber Dimensions 120 x 120 x 50 mm (4.72 x 4.72 x 1.97 in.)
Curing Chamber Access Top Loading
Operating Voltage 100,115,230,volt AC, Selectable
Nominal Frequency 50/60 Hz
Power Input About 250 W
Radiated/Flashed Lamp Power About 200 W (100 X/Lamp)
Light Power Ca. 1/3 of lamp power ≈ 66 W
Spectral Distribution 300-700 nm, max 400-500
Light Power in Interesting Spectrum Ca 1/3 of lamp power ≈ 11 W
Flash Rate 10 flashes per second
Digital Timer Adjustable from 1 up to 9999 flashes
Life Time 300-500 hours operating time (10.8 – 18 Mio flashes)
Outer Dimensions 310 x 310 x 140 mm (12.2 x 12.2 x 5.51 in.)
Weight 6kg (13.23 lbs)

Technical Data


Select Language